Gamber-Johnson 7160-0970: Workstation Console Box with 3″ and 5″ Mounting Openings

$37500

SKU: 7160-0970

Description

Features

  • Low profile, universal console with sloped front mounting area.
  • Designed to work with top plate/tunnel plate and leg kits.
  • Horizontal, low profile section:
    • Has a 3 inches (7.62 cm) mounting opening for device like control heads or device less than 4.5€� (11.43 cm) in length.
    • Two knockouts for switches, dual USB power ports, battery voltage display, data/mic jack or USB/AUX input module extension.
  • Vertical, angled section:
    • Has 5 inches (12.7 cm) of mounting space to accommodate 1 to 2 full-sized devices or faceplates.
    • Two 12-volt plug knockouts, located on passenger side and two knockouts for switches, dual USB power ports, battery voltage display, data/mic jack or USB/AUX input module extension.
    • PEM€™s for mounting mic clip (item no. 7120-0723) or Magnetic Mic (item no. 17040) on both sides.
    • Access door on passenger side of console for accessing fuse power distribution block tray, like power distribution block with negative bus (item no. 7160-0313).
    • Side vented openings for air flow or mounting a speaker inside the console box.
    • Front plate of console (underneath dash area) has placement for a power distribution block or Lind shut€�down timer using pre€�configured mounted holes.
    • Cutouts located on outside area of the console box by cup holders to pass cables through for use with small workstation€“no legs.
    • Computer can be center mounted in two locations:
      • Off€�set towards the passenger on the €œsmiley face pattern€�
      • On the 3€�bolt pattern closer to the driver for easy articulation access
  • Fully welded construction for long term product life span.
  • Box ships fully assembled with 3 faceplates and 3 filler panels. No accessories included.

Warranty: Limited Lifetime

  • A limited lifetime warranty is against manufacturer defects, not normal wear and tear.


Availability, Lead Times and Shipping

Please note that ALL Gamber-Johnson and Havis mounting and docking equipment typically takes at least a week to ship.  Lead times can often be 3-6+ weeks or longer depending on the exact items purchased.  The following is guidance only and changes frequently.

  • Basic mounting hardware such as plates or poles:  1-2 weeks to ship
  • Vehicle-specific kits or more complex mounting solutions:  2-4 weeks to ship
  • Powered docking stations with port replication:  4-8+ weeks to ship.

Please call, email, or chat with us to discuss lead times as it specifically relates to your needs.  Expedited shipping methods selected at checkout do not speed up lead times but rather reduce transit time when an order ships.

 

Additional information

Weight 42 lbs
Brand

Gamber Johnson

Description

Description

Features

  • Low profile, universal console with sloped front mounting area.
  • Designed to work with top plate/tunnel plate and leg kits.
  • Horizontal, low profile section:
    • Has a 3 inches (7.62 cm) mounting opening for device like control heads or device less than 4.5€� (11.43 cm) in length.
    • Two knockouts for switches, dual USB power ports, battery voltage display, data/mic jack or USB/AUX input module extension.
  • Vertical, angled section:
    • Has 5 inches (12.7 cm) of mounting space to accommodate 1 to 2 full-sized devices or faceplates.
    • Two 12-volt plug knockouts, located on passenger side and two knockouts for switches, dual USB power ports, battery voltage display, data/mic jack or USB/AUX input module extension.
    • PEM€™s for mounting mic clip (item no. 7120-0723) or Magnetic Mic (item no. 17040) on both sides.
    • Access door on passenger side of console for accessing fuse power distribution block tray, like power distribution block with negative bus (item no. 7160-0313).
    • Side vented openings for air flow or mounting a speaker inside the console box.
    • Front plate of console (underneath dash area) has placement for a power distribution block or Lind shut€�down timer using pre€�configured mounted holes.
    • Cutouts located on outside area of the console box by cup holders to pass cables through for use with small workstation€“no legs.
    • Computer can be center mounted in two locations:
      • Off€�set towards the passenger on the €œsmiley face pattern€�
      • On the 3€�bolt pattern closer to the driver for easy articulation access
  • Fully welded construction for long term product life span.
  • Box ships fully assembled with 3 faceplates and 3 filler panels. No accessories included.

Warranty: Limited Lifetime

  • A limited lifetime warranty is against manufacturer defects, not normal wear and tear.


Availability, Lead Times and Shipping

Please note that ALL Gamber-Johnson and Havis mounting and docking equipment typically takes at least a week to ship.  Lead times can often be 3-6+ weeks or longer depending on the exact items purchased.  The following is guidance only and changes frequently.

  • Basic mounting hardware such as plates or poles:  1-2 weeks to ship
  • Vehicle-specific kits or more complex mounting solutions:  2-4 weeks to ship
  • Powered docking stations with port replication:  4-8+ weeks to ship.

Please call, email, or chat with us to discuss lead times as it specifically relates to your needs.  Expedited shipping methods selected at checkout do not speed up lead times but rather reduce transit time when an order ships.

 

Additional information

Weight 42 lbs
Brand

Gamber Johnson

SHIPPING AND LEAD-TIMES
In general, Panasonic Toughbooks, accessories and related mounting equipment are enterprise solutions that are typically custom built to order and thus carry a lead-time of anywhere from 2-3 weeks to 2-3 months. Please be advised that online orders where expedited shipping is chosen does NOT mean that specific product is in stock and will ship right away. It simply means we will ship via the selected method when the product is available to ship. We can only confirm availability over the phone or online chat. While we do our best to have a wide variety of Toughbook models and accessories in stock, this particular supply chain is challenging and we ask that customers please confirm availability with us on the phone when time is a priority. Additionally, expedited shipping will not apply to multiple items that might have multiple lead-times and ship dates. It is typically applying to the main item of an order. Again, please call us ASAP at 877-532-8088 to discuss urgent needs and expedited shipping.

window.__lc = window.__lc || {}; window.__lc.ga_version = "gtag" window.__lc.license = 14945571; window.__lc.chat_between_groups = false; window.onload = function() { setTimeout(function(){ // Live Chat !function(){var e=document.createElement("script");e.type="text/javascript",e.async=!0,e.src=("https:"==document.location.protocol?"https://":"http://")+"cdn.livechatinc.com/tracking.js";var t=document.getElementsByTagName("script")[0];t.parentNode.insertBefore(e,t)}(); }, 3000); };