Gamber-Johnson 7170-0237-02: Chevrolet/GMC Truck and Full-Size SUV Console with Wiring Chase Kit

$48500

SKU: 7170-0237-02

Description

A low profile vehicle specific console box kit crafted for exceptional performance.

Kit Includes

  • 7160-0548 – Console Box
  • 7160-0509 – Leg Kit
  • 7110-1024 – Wiring Chase

Note: Only the accessories listed in the kit above are included. Items such as control heads, radios, docking stations, motion attachments, computers, toggle switch plates, and locking pocket shown in photos are not included. €‹Must order as is. There are no substitutions for accessories. Accessories may need to be assembled.

Mounting Space

  • Horizontal, low profile section
    • Accommodates 11.5 (29.21 cm) of mounting space excluding internal cup holder, designed to house full sized devices and accessories
    • Accommodates 7″ (17.78 cm) of mounting space including internal cup holder
  • Vertical, angled section
    • Accommodates 7.5″ (19.05 cm) of mounting space, designed to house 1 to 2 full sized devices

Features

  • Attaches to the vehicle without the need to order a separate top plate (leg kit is provided with the console box)
  • Two 12 volt plug inserts located on passenger side
  • USB/MP3/SD card from factory console can be relocated on passenger side using knock-outs or USB/MP3/SD card/12 Volt from factory console using faceplate (item no. 15250)
  • Front plate of console (underneath the dash) allows a fuse block or Lind shut down timer using pre-configured mounted holes
  • Computer can be center mounted in two locations:
    • Off-set towards the passenger on the €œsmiley face pattern”
    • On the 3-bolt pattern closer to the driver for easy articulation access
  • Console box works with manual 4×4 shift lever
  • Heavy gauge steel, fully welded construction for long-term durability
  • Black powder coat finish for maximum corrosion resistance
  • Box ships fully assembled
  • 3 faceplates and 3 filler panels are included

Compatible Accessories

  • If you require a cupholder, use the Internal Cupholder, item no. 7160-0846 or any external cupholders.
  • If you require an armrest, there are threaded PEMS on both sides of the console to attach driver armrest, item no. 7110-1013 and passenger armrest item no. 7110-1012. There are also threaded PEMS on the back of the console to use the following armrests: item no. 7160-0429, 7160-0430 or 7160-0524.

Warranty: Limited Lifetime

  • A limited lifetime warranty is against manufacturer defects, not normal wear and tear.


Availability, Lead Times and Shipping

Please note that ALL Gamber-Johnson and Havis mounting and docking equipment typically takes at least a week to ship.  Lead times can often be 3-6+ weeks or longer depending on the exact items purchased.  The following is guidance only and changes frequently.

  • Basic mounting hardware such as plates or poles:  1-2 weeks to ship
  • Vehicle-specific kits or more complex mounting solutions:  2-4 weeks to ship
  • Powered docking stations with port replication:  4-8+ weeks to ship.

Please call, email, or chat with us to discuss lead times as it specifically relates to your needs.  Expedited shipping methods selected at checkout do not speed up lead times but rather reduce transit time when an order ships.

 

Additional information

Weight 51 lbs
Brand

Gamber Johnson

Description

Description

A low profile vehicle specific console box kit crafted for exceptional performance.

Kit Includes

  • 7160-0548 – Console Box
  • 7160-0509 – Leg Kit
  • 7110-1024 – Wiring Chase

Note: Only the accessories listed in the kit above are included. Items such as control heads, radios, docking stations, motion attachments, computers, toggle switch plates, and locking pocket shown in photos are not included. €‹Must order as is. There are no substitutions for accessories. Accessories may need to be assembled.

Mounting Space

  • Horizontal, low profile section
    • Accommodates 11.5 (29.21 cm) of mounting space excluding internal cup holder, designed to house full sized devices and accessories
    • Accommodates 7″ (17.78 cm) of mounting space including internal cup holder
  • Vertical, angled section
    • Accommodates 7.5″ (19.05 cm) of mounting space, designed to house 1 to 2 full sized devices

Features

  • Attaches to the vehicle without the need to order a separate top plate (leg kit is provided with the console box)
  • Two 12 volt plug inserts located on passenger side
  • USB/MP3/SD card from factory console can be relocated on passenger side using knock-outs or USB/MP3/SD card/12 Volt from factory console using faceplate (item no. 15250)
  • Front plate of console (underneath the dash) allows a fuse block or Lind shut down timer using pre-configured mounted holes
  • Computer can be center mounted in two locations:
    • Off-set towards the passenger on the €œsmiley face pattern”
    • On the 3-bolt pattern closer to the driver for easy articulation access
  • Console box works with manual 4×4 shift lever
  • Heavy gauge steel, fully welded construction for long-term durability
  • Black powder coat finish for maximum corrosion resistance
  • Box ships fully assembled
  • 3 faceplates and 3 filler panels are included

Compatible Accessories

  • If you require a cupholder, use the Internal Cupholder, item no. 7160-0846 or any external cupholders.
  • If you require an armrest, there are threaded PEMS on both sides of the console to attach driver armrest, item no. 7110-1013 and passenger armrest item no. 7110-1012. There are also threaded PEMS on the back of the console to use the following armrests: item no. 7160-0429, 7160-0430 or 7160-0524.

Warranty: Limited Lifetime

  • A limited lifetime warranty is against manufacturer defects, not normal wear and tear.


Availability, Lead Times and Shipping

Please note that ALL Gamber-Johnson and Havis mounting and docking equipment typically takes at least a week to ship.  Lead times can often be 3-6+ weeks or longer depending on the exact items purchased.  The following is guidance only and changes frequently.

  • Basic mounting hardware such as plates or poles:  1-2 weeks to ship
  • Vehicle-specific kits or more complex mounting solutions:  2-4 weeks to ship
  • Powered docking stations with port replication:  4-8+ weeks to ship.

Please call, email, or chat with us to discuss lead times as it specifically relates to your needs.  Expedited shipping methods selected at checkout do not speed up lead times but rather reduce transit time when an order ships.

 

Additional information

Weight 51 lbs
Brand

Gamber Johnson

SHIPPING AND LEAD-TIMES
In general, Panasonic Toughbooks, accessories and related mounting equipment are enterprise solutions that are typically custom built to order and thus carry a lead-time of anywhere from 2-3 weeks to 2-3 months. Please be advised that online orders where expedited shipping is chosen does NOT mean that specific product is in stock and will ship right away. It simply means we will ship via the selected method when the product is available to ship. We can only confirm availability over the phone or online chat. While we do our best to have a wide variety of Toughbook models and accessories in stock, this particular supply chain is challenging and we ask that customers please confirm availability with us on the phone when time is a priority. Additionally, expedited shipping will not apply to multiple items that might have multiple lead-times and ship dates. It is typically applying to the main item of an order. Again, please call us ASAP at 877-532-8088 to discuss urgent needs and expedited shipping.