Gamber-Johnson 7160-0958: Wide Body Console with Brother Pocket Jet Printer Mount

$49500

SKU: 7160-0958

Description

Features

  • Low profile, universal console with sloped front mounting area
  • Designed to work with Top Plate / Tunnel Plate and Leg Kits
  • Two 12 Volt plug knockouts, located on the passenger side wall of console box and one knockout for switches , dual USB power ports, battery voltage display, data / mic jack or USB / AUX input module extension
  • Threaded inserts for mounting mic clip (item no. 7120-0723) or Magnetic Mic„¢ (item no. 17040) on both sides
  • Side vented openings for air flow or mounting a speaker inside the console box
  • Threaded inserts on both sides of console box for side armrest mounting (item no. 7110-1012 – passenger side armrest) and (item no. 7110-1013 – driver side armrest)
  • Threaded inserts on passenger sides of console box for the passenger side document compartment (item no. 7160-0464) and driver side armrest (item no. 7110-1013)
  • Threaded inserts on back of console box for mounting external cup holder (item no. 7160-0847) and MCS armrest (item no. 7160-0429) or printer armrest (item no. 7160-0430)
  • Front plate of console (underneath dash area) has placement for a power distribution block or Lind shut€�down timer using pre€�configured mounted holes
  • Box shipped assembled, except accessories
  • Computer can be center mounted in two locations:
    • Off€�set towards the passenger on the €œsmiley face pattern€�
    • On the 3€�bolt pattern closer to the driver for easy articulation access
  • Fully welded construction for long term product life span
  • 3 faceplates and 3 filler panels are included
  • Limited Lifetime Warranty

Horizontal, low profile section

  • Has a consistent mounting space height of 6.0″
  • Designed to house devices and accessories measuring less than 6 inches in depth
  • Has additional side mounting area of 2″ that will accommodate the 2-inch Faceplate for Switches or Power Ports (item no. 7160-0924) or a smaller device
  • Mounting for the Brother Pocket Jet series printer and roll of paper in the back of the console box
  • Removable printer cover for easy reloading of printer paper

Vertical, angled sections

  • Accommodates 1 to 2 full sized devices or faceplates (5€� of mounting space)
  • Two 12 Volt plug Knockouts, located on top passenger side and 2 knock-outs for switches , dual USB power ports, battery Voltage display, data / mic jack or USB / AUX input module extension

Warranty: Limited Lifetime

  • A limited lifetime warranty is against manufacturer defects, not normal wear and tear.


Availability, Lead Times and Shipping

Please note that ALL Gamber-Johnson and Havis mounting and docking equipment typically takes at least a week to ship.  Lead times can often be 3-6+ weeks or longer depending on the exact items purchased.  The following is guidance only and changes frequently.

  • Basic mounting hardware such as plates or poles:  1-2 weeks to ship
  • Vehicle-specific kits or more complex mounting solutions:  2-4 weeks to ship
  • Powered docking stations with port replication:  4-8+ weeks to ship.

Please call, email, or chat with us to discuss lead times as it specifically relates to your needs.  Expedited shipping methods selected at checkout do not speed up lead times but rather reduce transit time when an order ships.

 

Additional information

Weight 65 lbs
Brand

Gamber Johnson

Description

Description

Features

  • Low profile, universal console with sloped front mounting area
  • Designed to work with Top Plate / Tunnel Plate and Leg Kits
  • Two 12 Volt plug knockouts, located on the passenger side wall of console box and one knockout for switches , dual USB power ports, battery voltage display, data / mic jack or USB / AUX input module extension
  • Threaded inserts for mounting mic clip (item no. 7120-0723) or Magnetic Mic„¢ (item no. 17040) on both sides
  • Side vented openings for air flow or mounting a speaker inside the console box
  • Threaded inserts on both sides of console box for side armrest mounting (item no. 7110-1012 – passenger side armrest) and (item no. 7110-1013 – driver side armrest)
  • Threaded inserts on passenger sides of console box for the passenger side document compartment (item no. 7160-0464) and driver side armrest (item no. 7110-1013)
  • Threaded inserts on back of console box for mounting external cup holder (item no. 7160-0847) and MCS armrest (item no. 7160-0429) or printer armrest (item no. 7160-0430)
  • Front plate of console (underneath dash area) has placement for a power distribution block or Lind shut€�down timer using pre€�configured mounted holes
  • Box shipped assembled, except accessories
  • Computer can be center mounted in two locations:
    • Off€�set towards the passenger on the €œsmiley face pattern€�
    • On the 3€�bolt pattern closer to the driver for easy articulation access
  • Fully welded construction for long term product life span
  • 3 faceplates and 3 filler panels are included
  • Limited Lifetime Warranty

Horizontal, low profile section

  • Has a consistent mounting space height of 6.0″
  • Designed to house devices and accessories measuring less than 6 inches in depth
  • Has additional side mounting area of 2″ that will accommodate the 2-inch Faceplate for Switches or Power Ports (item no. 7160-0924) or a smaller device
  • Mounting for the Brother Pocket Jet series printer and roll of paper in the back of the console box
  • Removable printer cover for easy reloading of printer paper

Vertical, angled sections

  • Accommodates 1 to 2 full sized devices or faceplates (5€� of mounting space)
  • Two 12 Volt plug Knockouts, located on top passenger side and 2 knock-outs for switches , dual USB power ports, battery Voltage display, data / mic jack or USB / AUX input module extension

Warranty: Limited Lifetime

  • A limited lifetime warranty is against manufacturer defects, not normal wear and tear.


Availability, Lead Times and Shipping

Please note that ALL Gamber-Johnson and Havis mounting and docking equipment typically takes at least a week to ship.  Lead times can often be 3-6+ weeks or longer depending on the exact items purchased.  The following is guidance only and changes frequently.

  • Basic mounting hardware such as plates or poles:  1-2 weeks to ship
  • Vehicle-specific kits or more complex mounting solutions:  2-4 weeks to ship
  • Powered docking stations with port replication:  4-8+ weeks to ship.

Please call, email, or chat with us to discuss lead times as it specifically relates to your needs.  Expedited shipping methods selected at checkout do not speed up lead times but rather reduce transit time when an order ships.

 

Additional information

Weight 65 lbs
Brand

Gamber Johnson

SHIPPING AND LEAD-TIMES
In general, Panasonic Toughbooks, accessories and related mounting equipment are enterprise solutions that are typically custom built to order and thus carry a lead-time of anywhere from 2-3 weeks to 2-3 months. Please be advised that online orders where expedited shipping is chosen does NOT mean that specific product is in stock and will ship right away. It simply means we will ship via the selected method when the product is available to ship. We can only confirm availability over the phone or online chat. While we do our best to have a wide variety of Toughbook models and accessories in stock, this particular supply chain is challenging and we ask that customers please confirm availability with us on the phone when time is a priority. Additionally, expedited shipping will not apply to multiple items that might have multiple lead-times and ship dates. It is typically applying to the main item of an order. Again, please call us ASAP at 877-532-8088 to discuss urgent needs and expedited shipping.